General

Antenna:                              K band

Frequency:                            24.150 GHz +/- 50 MHz

Nominal Power out:                    10mW nominal

Output Power Density:                 0.5 mW/cm2

Beam Width:                           12 degrees

Detection Range:                      1500 feet

Supply voltage:                       10.8VDC – 24VDC

Nominal current draw:                 +12V (0.180A) +24V (0.120A)

Surge current requirements:           1 Amp

Operation temperature:                -22F to +158F (-30C to +70C)

Maximum Humidity:                     100% (Unit is weatherproof, not waterproof)

Polarization:                         Linear

Input voltage:                        10.8 – 24VDC

Processor

Serial communications:                RS232

Data rate:                            Baud rates 1200, 2400, 9600, 19200, 38400, 57600,                                                   115200

Data format:                          [SSS.](Default) 

Target acquisition time:              50ms

Mechanical

Weight:                               1.14lb. (0.52kg.)

Length:                               5.6 in. (14.05cm.)

Width:                                3 in. (7.6cm.) diameter horn, 3.37 in. (8.55cm.)                                                                             diameter with mounting base

Accuracy

Speed Range:                           5 – 150 mph (8 – 240 Km/h)

Accuracy:                              +/- 1 unit of measure (mph, kph)

DB-9 Connector Pinout

Signal:                                DB-9 Connector

+12VDC power:                          1 (red)

RS232 TX:                              2 (black)

RS232 RX:                              3 (green)

Ground (shield):                       5 (brown)

Ground:                                9 (black)

Output Rate (Programmable)

Selectable output rate when target speed changes: 1 – 10 times per second

Data hold time: 100 to 9999 ms

Angle and Direction (Programmable)

Horizontal and vertical cosine corrections from 0 – 45 degrees

Direction Report:

                                        D = “+” (Approaching target),

                                        D = “-” (Receding target),

                                        D = “?” (Unknown direction)